etm Anti-Vibration Washing Machine Mat - Soundproof Mat for Appliances | Thick Rubber | Sound and Impact Absorbing | Thickness: 5mm - 200 x 62.5 cm

I've picked this mat as a pad for desktop PC case (standing on my wooden desk): 11 kg od plastic & metal with 9 fans inside. That's a lot of weight, noise and vibrations and the mat handled them all with ease.Mat is made from some sort of rubber, consisting of many tiny fragments glued/pressed in some way. It's rigid to the point that it's not too easy to cut it to size (thin & very sharp knife is a must) and at the same time it absorbs vibrations even from really heavy objects like full-sized home appliances (washing machine, tumble dryer and so on).So even though 5mm thickness may not be that convincing at the start, it really is enough to get those results. The vibrations are gone and the noise reduces instantly to the very minimum.And what are the downsides of this product? Only minor ones: due to its structure its not easy to get clean cuts on the edges. So they may end up a bit uneven/irregular, depending on the tool you will use. Also, on smoother surfaces (desks, tiled floors...) and lighter objects (<10kg) the mat may be a little slippery - but two sided tape deals with that perfectly.All considered, this product is really well made and delivers impressive results. It turned my computer from annoying junk to silent workstation and I have no doubt I will pick this mat for my future kitchen appliances. Highly recommended!

Good quality

It was a bit hard to put it under a heavy washing machine. But they reduced the washing machine movement and slightly reduces the noise while it is on.

Really good product, works perfectly

This is a fantastic item. I was a bit worried it wouldn’t work but it’s good. The house doesn’t shake as much as it did pre mat. My handyman found it hard to put under the washing machine and keep it on the mat as he pushed it back under the worktop and it took about half an hour to get it right but the item does the trick so I am pleased.

I have a wooden floor with tiles on top. Even though the washing machine is perfectly level using a spirit level it still bounced and vibrated. Its a new fairly expensive machine so the only reason can be the flooring, which I have heard is the problem in most cases. As I cant change the floor I tried this mat as a last resort. The gap left between the machine and the worktop above is only 1cm so i cold only get the 1cm thick mat, although I doubt any thickness would stop the vibrations.It was a nightmare to install as it doesnt slide along the tiles once the machine is on top and once it was in position the 'give' in the mat made the wobbling even worse, so I removed it again, and threw it down the garden.....thats how I feel about my washine machine issue at the moment.Hopefully it'll work for you, but unfortunatey for me it only made the problem worse.TOP TIP: If you are installing this under your machine which is to be installed under a worktop, cover the floor and the back of the mat in talcum powder. It makes a mess but then it all slides under the worktop beautifully.I have given this a 3* because although it didnt work for me, I would think that it would help if you have a concrete / more solid flooring. I was offered a refund even though I had cut the mat to fit under the worktop as it is slightly longer than it is wide, so no complaints there regarding the company that sold the mat.

This 10mm sheet has stopped our new washing machine dancing around on the kitchen quarry tiles! Put 3 screws in to the front edge to stop it moving whilst walking the washing machine on to it in its slot.

The product is made of a reasonably dense rubber crump and looks to be of recycled material, quite what it has been chopped and reformed from to make the sheet is anyone's guess. It's not solid black, but has coloured speckles throughout.I bought the 10mm sheet in an attempt to dampen the transference of vibration from a newly purchased washing machine to a wooden joist floor. 10mm was the maximum clearance I have under the worksurface. I wasn't expecting miracles, just to reduce the worst of the vibration.For the material to work it needs to absorb and distribute some of the energy of a 1400 rpm spin cycle; it doesn't, the rubber is too dense to do so. If your machine is walking over a slippery floor it would work, however, the add on to this is that once laid under a kitchen cabinet it is very, very difficult to get a machine in and out (a bit of shiny card on the feet or washing-up liquid may help with this).For what it is £25 is overpriced, £10-15 ok. For my purposes it was a complete waste of time and I ended up requesting a return.

Pour poser sous une machine à laver pour atténuer le bruit parfait

The media could not be loaded.  Am Anfang hatte ich bedenken dass die Matte nicht gut für meine Waschmaschine sein könnte, aber da hab ich mich geirrt ! Ich bin begeistert wie gut die Matte die Schwingungen beim Schleudern abfängt dadurch Wackelt die Waschmaschine natürlich ein wenig aber damit kann man leben weil der Lärm selber komplett weg ist und die Qualität der Matte ist auch Spitzenklasse! ⭐️⭐️⭐️⭐️⭐️💪

Doet wat het moet doen. Iets dikker had nog iets beter geweest

!!

Nous l'avons installé sous la machine à laver. Nous ne sommes plus incommodés par les bruits liés à l'essorage.